SawStop RT-PHFS Owner's Manual page 23

Finger tighten the hex nuts up against
4
the bottom of the table. You will adjust
the screws and fully tighten the hex nuts
later, after installing the router lift.
If you wish to install the optional
5
Downdraft Dust Collection Box
(RT-DCB), do so now according to the
instructions in your Four Post Router
Lift with Lock manual. (Copies of your
manuals can be downloaded at
www.sawstop.com).
Continue on to the next page for instructions to install the 32" x 24" Cast Iron Router Table.
RT-FS/RT-PHFS OWNER'S MANUAL
18