Before Cleaning The Wine Unit; Interior, Accessories, And Appliance Door; Cleaning The Ventilation Gaps; Cleaning The Door Seal - Miele KWT 6321 UG Operating And Installation Instructions

Before cleaning the wine unit

 Switch the wine unit off.
 Switch off at the wall and withdraw
the plug from the socket, or discon-
nect the mains fuse.
 Take any wine bottles out of the wine
unit and store them in a cool place.
 Take out all other removable parts for
cleaning.
Interior, accessories, and ap-
pliance door
Clean the wine unit at least once a
month.
Remove soiling immediately to pre-
vent it from drying on.
 Clean the interior with a solution of
lukewarm water and a little washing-
up liquid.
 The wooden shelves should only be
wiped with a well wrung-out damp
cloth. They must not be allowed to
get wet.
 After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the door
open to air the wine unit for a short
while.
 Clean the appliance door with a pro-
prietary glass cleaner.
Cleaning and care

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (e.g. use the
dusting brush for Miele vacuum
cleaners)

Cleaning the door seal

Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
 The door seal should be cleaned reg-
ularly with clean water, and then
wiped dry with a soft cloth.

Cleaning the air filter

 Clean the air filter behind the ventila-
tion grille at least once a year.
 Remove the air filter and vacuum it
thoroughly on both sides. A dirty filter
can prevent the wine conditioning
unit from cooling sufficiently.
After cleaning
 Replace all shelves and accessories
in the wine conditioning unit.
 Reconnect to the mains and switch
the wine conditioning unit back on.
 Place the wine bottles back in the
wine conditioning unit and close the
door.
33