Before Cleaning The Wine Conditioning Unit; Interior, Accessories And Appliance Door; Cleaning The Ventilation Grilles; Cleaning The Door Seal - Miele KWT 6312 UGS Operating And Installation Instructions

Before cleaning the wine con-
ditioning unit
 Switch off the appliance.
 Unplug the appliance or trip the cir-
cuit breaker.
 Take any wine bottles out of the wine
conditioning unit and store them in a
cool place.
 Take out all other removable parts for
cleaning.
 Remove the magnetic strips from the
wooden shelves before cleaning them
(see "Labeling wooden shelves").
Interior, accessories and appli-
ance door
Clean the wine conditioning unit reg-
ularly, or at least once a month.
Clean up any spills, stains or food
immediately. Do not allow them to
dry and stick to the appliance.
 Clean the interior with a solution of
lukewarm water and liquid dish soap.
 The wooden shelves should only be
wiped with a damp cloth. They must
not be allowed to get wet.
 Use clean water only to wipe the
magnetic strips at the front of the
wooden shelves. Do not use a clean-
ing agent as this would damage the
blackboard paint.
 After cleaning, wipe the interior and
accessories with a damp cloth, and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
Cleaning and care
 Clean the appliance door with a glass
cleaner.

Cleaning the ventilation grilles

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The air vents should be cleaned on a
regular basis with a brush or vacuum
cleaner (you could use a Miele vac-
uum cleaner dusting brush, for exam-
ple).

Cleaning the door seal

Do not use any grease or oil on the
door seal as these will cause the seal
to deteriorate and become porous
over time.
 The door seal should be cleaned reg-
ularly with clean water and then
wiped thoroughly dry with a soft
cloth.
45