Programming - AC Infinity AIRTITAN SERIES User Manual

PROGRAMMING

1. MODE BUTTON
This button cycles through
each of the controller's
modes settings. Hold for
two seconds to return to
the main screen.
4. PROBE TEMP.
Displays the current tempera-
ture that the corded sensor
probe is measuring. Shows
"- -" if no probe is plugged in..
7. LOW TEMP.
Displays the low temp. you
have set the fans to run when
the sensor's temp. falls below
this setting.
10. ALERT ICONS
The icons on the display represents fan failure, temperature alarm, humidity alarm and display lock.
The icons will flash and may emit an audible beep when triggered.
12
2. LEAF BUTTON
This turns the display
off while programs run
in the background. Hold
for two seconds to lock
or unlock the display.
1 5
4
2 6 7
5. PROBE HUMIDITY
Displays the current humidity
that the corded sensor probe
is measuring. Shows "- -" if no
probe is plugged in.
8. HIGH HUMIDITY
Displays the high humidity you
have set the fans to run when
the sensor's humidity exceeds
this setting.
9
3
10
8
3. UP / DOWN BUTTON
This increases, decreases,
or adjusts the settings
of the controller for each
mode. Up to increases and
down to decreases.
6. HIGH TEMP.
Displays the high temp. you
have set the fans to run
when the sensor's temp.
exceeds this setting.
9. LOW HUMIDITY
Displays the low humidity you
have set the fans to run when
the sensor's humidity falls
below this setting.