AC Infinity AIRTITAN SERIES User Manual page 13

PROGRAMMING
1. MODE
In this settings mode, you can set the fan's primary program-
ing mode. Remember to return to the main screen after
you finished adjusting your settings.
ON Mode – Fans will run continuously regardless of temper-
ature or humidity. The speed the fans run at will be the speed
you have set in (2) Fan Speed.
OFF Mode – Fans will not run regardless of temperature or humidity.
AUTO Mode – For high temperature or humidity triggers, the fans will start running when the
measured value exceeds your set value. The fans will stop running when the measured value falls
below your set value by the number set as the buffer. For low temperature or humidity triggers,
the fans will start running when the measured value falls below your set value. The fans will stop
running when the measured value rises above your set value by the number set as the buffer. The
speed the fans will run at is the speed set in (2) Fan Speed.
SMART Mode – For high temperature or humidity triggers, the fans will slowly increase in speed
when the measured value exceeds your set value. When the measured value falls below your set
value, the fans will slowly decrease in speed until the fan stops. For low temperature or humidity
triggers, the fans will slowly increase in speed when the measured value falls below your set value.
When the measured value rises above your set value, the fans will slowly decrease in speed until
the fan stops, when the measured value rises above your set value. The max speed the fans will
reach is the speed set in (2) Fan Speed.
2.SPEED
In this mode, the fans will run non-stop regardless
of temperature or humidity. Pressing the up and down
buttons in this mode will change the speed of the fan.
Which ever speed is designated in this mode will also be
the speed used in ON, AUTO and SMART Mode.
13