Advertisement
PROGRAMMING
1. MODE BUTTON
This button cycles through
each of the controller's
modes: ON, OFF, TIMER,
AUTO (4 triggers), and
ALARM (4 settings).
(AIRTITAN T8, T8N Screen Display)
1
6
5
3
4. PROBE TEMP.
Displays the current tempera-
ture that the corded sensor
probe is measuring. Shows
"- -" if no probe is plugged in.
7. PROBE HUMIDITY
Displays the current humidity
that the corded sensor probe
is measuring. Shows "- -" if
no probe is plugged in.
12
2. UP / DOWN BUTTON
The up and down buttons
adjusts the settings of the
mode that you are in. Up
button increases and
down button decreases.
7
8
4
9
5. CONTROLLER MODE
This area displays the mode
that the controller is currently
in. Press the Mode Button to
cycle through the modes.
8. FAN SPEED
Displays the current speed
the fan is running at, or what
speed it should be running at
if no fans are plugged in.
(AIRTITAN T3, T7 Screen Display)
6
2
1
3. LEAF BUTTON
This turns the display off
while programs run in the
background. Hold for two
seconds to lock or unlock
the display.
7
8
5
4
9
2
6. ALERT ICONS
This area displays the alerts
and statuses from the
controller including alarms
and screen lock.
9. SETTING
Displays the value you
have set for the current
mode. Press the up or
down button to change.
3
Hide quick links:
Advertisement
