Gemini 953 Installation And Use Manual page 9
Hide thumbs
Also See for 953:
- Installation and use manual (20 pages) ,
- Installation and use manual (17 pages)
Table of Contents
Advertisement
INSTALLER MANUAL
CONTENTS
1.0
- PRELIMINARY ADVICE
2.0
- ALARM UNIT POSITIONING
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
-
11.0
12.0
13.0
-
14.0
15.0
16.0
1.0 - PRELIMINARY ADVICE
Please read all instructions and understand them thoroughly before
starting installation.
Page 15
wire)
If a jet wash is used to clean the vehicle, protect the alarm unit from water
splashes and be careful not to expose it to high pressure jets.
The warranty will not cover damages to the system due to water infiltrations
caused by improper installation, jet washing or the use of non original
accessories, not approved by the manufacturer.
2.0 - ALARM UNIT POSITIONING
Do not install the alarm unit in this
position as water ingress over time
may seep through the rubber sheath
NO!
and permanently damage the
electronic circuit making the alarm
system unreliable.
Eventual malfunctioning due to water
infiltration is not covered by warranty.
!
Fitt
ing th
e control unit
in this position, will prevent
water entering the unit
.
!
It is important to give the rubber sheath a 'goose-
neck' bending as shown in the picture opposite and
secure with a tie wrap.
!
Do not expose to atmospheric agents.
!
Pay attention not to muffle the siren speaker
!
Secure away from moving mechanical parts.
!
Keep away from devices that could generate high
frequency electromagnetic disturbances.
!
Keep away from devices that could reach high
OK!
temperatures when the vehicle is in use.
!
Do not secure t
he
control unit directly on the vehicle
frame.
CAUTION
.
Page 16
Advertisement
Chapters
Table of Contents
