Emerson AMS 2140 Quick Start Manual page 6

Quick Start Guide
Figure 1-2:
ALT 2 keys—horizontal alignment
Option
F1 Notes
F2 Job Mode
F3 Machine Config
F4 Laser Align
Method
F5
F6 Tolerance Type
F7 Exit Laser Align
F8 Head Config
F9 Job Manager
6
ALT 2 keys—Advanced horizontal alignment job
Description
Create, add, or remove notes from an alignment job or the AMS 2140.
Notes can be saved with the job to help you remember important
information about a machine.
Select Advanced or Basic.
Select the machine components for the alignment job.
Select the alignment method.
This is intentionally blank when the job mode is set to Basic. Manual 4
Point is the only alignment method available in Basic mode.
Intentionally blank.
Select Standard or Jackshaft tolerance.
Exit the Laser Align Application and return to the Home screen.
Specify or view the placement of the laser and sensor.
This is also where you can check the status of the laser and sensor.
Perform job-related tasks such as creating, activating, copying, or
editing a job.
This is also where you can select the Connect for Transfer button that
enables you to transfer jobs between the AMS 2140 and the PC.
AMS 2140 Advanced Laser Alignment Application
December 2018