Emerson AMS 2140 Quick Start Manual page 27

December 2018
The status LED on the AMS 2140 flashes and an audible tone is
produced whenever a reading is taken. The audible tone is only
available when the Status Beeper is enabled (Home > ALT > F2 General
Setup > F3 Set Status Beeper).
c. After taking readings for each of the cardinal position, press Enter.
4. If the Review Results option is enabled, review the results, view the
tolerance plots, or repeat the reading.
Refer to the Alignment chapter of the AMS 2140 Machinery Health
Analyzer User Guide for more information on reviewing alignment
measurement results.
5. After reviewing results, press Enter to advance to the next step (Move
Machine).
4.3 Align the machine
After you acquire alignment data, the Laser Align Application automatically
advances to the next step, which is to make adjustments on the machines to
align them (Move Machine), if necessary. After completing this step, the
Move Machine function on the Laser Align Application main menu is marked
with an X.
Procedure
1. After acquiring alignment data, press Enter.
2. Review the amount of required vertical and horizontal machine moves
and make the necessary adjustments to the machine.
Quick Start Guide
Quick Start Guide
27