Emerson AMS 2140 Quick Start Manual page 30

Quick Start Guide
Refer to the Alignment chapter of the AMS 2140 Machinery Health
Analyzer User Guide for more information on calculating extra
machine feet.
b. Press F5 Alternate Move to switch between the alternate pairs of feet
where the machine moves can be made.
If all dimensions are entered, up to six alternate moves are available.
c. Press F6 Switch Move Type to select a move type. You can choose
vertical, horizontal, or vertical and horizontal.
d. Press F8 Data Detail to view the tolerance plots.
The tolerance plots are a graphical representation of the alignment
condition of the machine. Refer to the Alignment chapter of the AMS
2140 Machinery Health Analyzer User Guide for more information on
the tolerance plots.
e. Press F10 Predict to estimate the resulting alignment condition based
on a theoretical adjustment prior to actually moving the machine.
This is useful in determining whether appropriate shims are available
to correct the misalignment. Refer to the Alignment chapter of the
AMS 2140 Machinery Health Analyzer User Guide for more
information on the predict mode.
f. Press F12 Live Move to observe the machine movement in real time
from the AMS 2140 while making machine moves.
See
3. If necessary, acquire alignment data again. See
4.3.1 Perform live move
The Live Move option lets you observe the machine movement from the AMS
2140 while you are moving the machine.
Only the horizontal live move is covered in this document.
Procedure
1. On the Machine Move screen, press F12 Live Move.
Note
This option is present on the Horizontal Move screen by default and is
also present depending on the live move orientation you have previously
chosen. See
30
Section 4.3.1 for more information on performing live move.
Section 3.3.8.
Section
AMS 2140 Advanced Laser Alignment Application
December 2018
4.2.