Table of Contents
Advertisement
Cleaning the ice cube tray
The ice cubes freeze in the ice cube
tray before they fall into the ice cube
drawer.
Clean the ice cube tray regularly with
warm water and some dishwashing
liquid to remove ice and water residue.
The ice cube tray is not removable and
can only be cleaned in place.
Also clean the ice cube maker
before turning it off for an extended
time.
^ Connect the appliance to the
electricity supply.
^ Open the ice cube drawer slightly.
^ Press the On/Off button a on the ice
cube maker. The indicator light will
come on.
^ Empty the ice cube drawer.
^ Press the On/Off button on the ice
cube maker and hold it for at least
12 seconds.
The indicator light flashes slowly at first
and then rapidly.
Cleaning and care
^ Push the ice cube drawer fully in
within the next 60 seconds.
You will hear the ice cube tray turning
to a slanted position.
^ Wait until the ice cube tray has
completed this rotation before
continuing.
You can then clean the ice cube tray in
the appliance:
^ Remove the ice cube drawer and
clean it.
^ Clean the ice cube tray b in the ice
cube maker.
After cleaning
^ Press the On/Off button on the ice
cube maker.
^ Push the ice cube drawer in again.
You will hear the ice cube tray returning
to its original position.
The ice cube maker will begin to
produce ice cubes again after a
maximum of 6 hours.
Discard the first three containers of
ice cubes. They are not suitable for
consumption, because dishwashing
liquid has been used for cleaning.
41
Advertisement
Table of Contents
