Table of Contents
Advertisement
1 & 2
Press to move cursor.
3 & 4
When the cursor is at tthe Line 1 - f : Decreasing/increasing a preset number.
When the cursor is at the other positions : Moving the loops number.
5/TAP
When the cursor is at the Line 1 - f : Decreasing a bank number.
When the cursor is at the other positions : Activating/deactivating the Spill Over function.
When the cursor is at the Line 1 - f : Increasing a bank number.
▲
BANK
When the cursor is at the other positions : Activating/deactivating the Mixer function.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
Returning to the SETUP menu.
4.1.1 Changing the Effect Loop Connection Order
Example : Change the order of effect loops 3 and 4.
Before the change
① Use the 1 or 2 switch to move the cursor to loop 3.
③ Press the MODE switch to store this edit.
You can change other connection orders in the same way.
EFX - LE Audio Controller Owner's Manual
② Press 4 switch to move the loop 3.
12
Advertisement
Table of Contents
