Table of Contents
Advertisement
4.6.7 TEMPO SYNC WITH
This sub-menu allows determining where to send the TAP-TEMPO signal.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - o : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Scrolling a TEMPO SYNC WITH value.
▲
5/TAP & BANK
When the cursor is at the Line 1 - o : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
4.6.8 TEMPO SYNC TIME
This sub-menu allows determining how long the TAP-TEMPO signal outputs.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - o : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Scrolling a TEMPO SYNC TIME value.
▲
5/TAP & BANK
When the cursor is at the Line 1 - o : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
4.6.9 XPDL RATE
The XPDL Rate parameter provides a selectable rate at which the EFX-LE will sample the pedal position and send out
MIDI Control Change messages. The XPDL Rate parameter is adjustable from 1 to 50ms. The lower the value selected,
the faster the transmission. However, the rate may need to be slowed down for devices where an error may occur from
receiving MIDI messages faster than a rate that the device can process.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - i : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Decreasing/increasing a value.
▲
5/TAP & BANK
When the cursor is at the Line 1 - i : Moving a UTILITY menu by 5.
When the cursor is at the Line 2 – p : Decreasing/increasing a value by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
EFX - LE Audio Controller Owner's Manual
• Line 2 - h to p indicate the TEMPO SYNC WITH value.
MTC : MIDI TIME CLOCK
F1 : FUNCTION SWITCH 1
• Line 2 - h to p indicate the TEMPO SYNC WITH value.
(OFF, 1 BAR, 2 BARS or CONTINUE )
The TAP signal is output to the menu selected in TAP SYNC WITH
during the time selected in TAP SYNC TIME.
• Line 2 - h to p indicate the XPDL RATE value (1-50 ms).
28
Advertisement
Table of Contents
