Table of Contents
Advertisement
4.6.13 LP6 SEND.R SPLIT
This sub-menu allows determining whether the SND6-Left signal is split up in to the SND6-Right.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - p : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Switching between OFF and ON .
▲
5/TAP & BANK
When the cursor is at the Line 1 - p : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
Note :
When you use a Stereo IN/OUT effect pedal in the Loop 6, this menu must be ON.
For the other side, when you use a Mono IN/Stereo OUT or Mono IN/OUT effect pedal in the Loop 6, this menu must
be OFF.
4.6.14 GLOBAL PRESET
This sub-menu allows determining whether you to use the GLOBAL PRESET or not.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - m : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Switching between ENABLE or DISABLE .
▲
5/TAP & BANK
When the cursor is at the Line 1 - m : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
4.6.15 MUTE -> LOOP ON
This sub-menu allows you to turn on a specific loop when activating the mute function.
This function is useful when using the Eventide H9 tuning function in the loop.
EFX - LE Audio Controller Owner's Manual
• Line 2 - h to p indicate the OFF or ON .
• Line 2 - h to p indicate the ENABLE or DISABLE.
• Line 2 - h to p indicate the NO ASSIGN or LOOP1 to LOOP6.
30
Advertisement
Table of Contents
