Func. Switch; Iso-Out Source; Lp 5/6 Return - Musicom Lab EFX - LE Owner's Manual

Hide thumbs Also See for EFX - LE:
Table of Contents

Advertisement

4.6.10 FUNC. SWITCH 1/2

The F1 and F2 will act as footswitches like those used for amp channel switching. The EFX-LE supports three types of
switch. Latched, momentary and reverse latched.
The sub-menu allows the selection of the function switches type.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - m : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Selecting LATCHED, MOMENTARY or REV LATCH.
5/TAP & BANK
When the cursor is at the Line 1 - m : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/
)
exiting to the UTILITY menu.

4.6.11 ISO-OUT SOURCE

This sub-menu allows determining which signal is split to the ISO-OUT.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - n : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Scrolling a ISO-OUT SOURCE value.
5/TAP & BANK
When the cursor is at the Line 1 - n : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/
)
exiting to the UTILITY menu.

4.6.12 LP 5/6 RETURN

This sub-menu allows determining whether effect loop 5 and 6 are MONO-Return or STEREO-Return.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - j : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Switching between MONO and STEREO.
5/TAP & BANK
When the cursor is at the Line 1 - j : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/
)
exiting to the UTILITY menu.
EFX - LE Audio Controller Owner's Manual
• Line 1 – a to m indicate the function switch 1 or 2.
• Line 2 - h to p indicate the function switch type.
(LATCHED, MOMENTARY or REV LATCH).
• Line 2 - h to p indicate which signal is split to the ISO-OUT .
VL.SEND : VOLUME LOOP SEND
OUT.L : OUTPUT-LEFT
OUT.R : OUTPUT-RIGHT
POST.VL : Between VOLUME and NEXT LOOP
• Line 1 – a to j indicate the return of loop 5 or 6.
• Line 2 - h to p indicate the MONO-Return or STEREO-Return.
29

Advertisement

Table of Contents
loading

Table of Contents