Front Panel - Musicom Lab EFX - LE Owner's Manual

1.4 Front Panel

1 through 4 switches
When in Preset mode these switches are used to recall the corresponding preset. When in IA1, IA2 or IA3 mode
pressing these switch turn on/off the corresponding effect loop, function switches, ouputs and buffers.
5/TAP switch
This Switch can have two functions based upon your needs. By default, this button is set up to access
the Preset 5, You can also program this switch to TAP TEMPO. Refer to the Activate/Deactivate TAP Switch on the
page 9 of the manual.
MODE switch
Pressing this switch puts the EFX-LE into the IA1 mode, where you can turn individual loops on and off, and store
their settings to presets. For the other side, pressing this switch for 2 seconds puts the EFX-LE into the SETUP mode.
BANK▲ switch
The 360 presets in the EFX-LE are arranged in banks of 5, and these buttons allow you to select which bank of 5
you'd like to access. Pressing this switch in Preset mode increments the bank number.
MUTE/BANK▼ switch
This Switch can have two functions(MUTE and BANK DOWN).
Pressing and holding this switch in Preset mode decrements the bank number.
For the other side, pressing this switch will execute the MUTE function.
LCD Display
Line 1 and 2 - a to d indicate a bank or song number
Line 1 - e to p indicate a Preset or Song Title.
Line 2 - e indicates a preset number within the bank or song.
Line 2 - g to l indicate which of the 6 audio loops are currently active.
Line 2 - m and n indicate which of the two audio outputs are active.
Line 2 - o and p indicate which of the 2 function switches are currently active.
5
EFX - LE Audio Controller Owner's Manual