4.1.2 Making a Parallel Connection
Example : Connect effect loops 5 and 6 in parallel.
Before the change
① Use the 1 or 2 switch to move the cursor to loop 6.
③ Use the 1 switch to move the cursor to loop 5.
⑤ Press the MODE switch to store this edit.
You can change other connections in the same way.
4.1.3 Specify Spill Over
Example : You can specify Spill Over for effect loop 6.
Before the change
① Use the 1 or 2 switch to move the cursor to loop 6.
③ Press the MODE switch to store this edit.
You can change other Spill Over in the same way.
EFX - LE Audio Controller Owner's Manual
▲
② Press BANK
switch to specify the parallel connection.
④ Press 4 switch to move the loop 3 into the parallel
connection.
② Press the 5/TAP switch to specify the Spill Over.
13