Table of Contents
Advertisement
4.6.4 MUTE POSITION
This sub-menu allows for the selection of the mute circuit to be activated by turning on the MUTE switch.
Refer to the BLOCK DIAGRAM on the page 4.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - m : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Selecting VL.SEND, OUT.L/R or NO ASSIGN.
▲
5/TAP & BANK
When the cursor is at the Line 1 - m : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
4.6.5 MAX BANK NUMBER
This menu blocks to access to bank number in the preset mode.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - n : Moving a UTILITY menu.
When the cursor is at the Line 2 – m : Decreasing/increasing a MAXIMUM BANK NUMBER.
▲
5/TAP & BANK
When the cursor is at the Line 1 - n : Moving a UTILITY menu by 5.
When the cursor is at the Line 2 – m : Decreasing/increasing a MAXIMUM BANK NUMBER by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
4.6.6 DUPLICATED PC
The sub-menu allows determining the transmission of MIDI Program Change message when current MIDI Program
Change number equates with previous one.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - m : Moving a UTILITY menu.
When the cursor is at the Line 2 – p : Switching between SEND and NOT SEND.
▲
5/TAP & BANK
When the cursor is at the Line 1 - m : Moving a UTILITY menu by 5.
STORE (MODE)
Storing any changes made while in this menu.
▼
EXIT (MUTE/
)
exiting to the UTILITY menu.
EFX - LE Audio Controller Owner's Manual
• Line 2 - h to p indicate the MUTE position.
VL.SEND – SEND of Volume Loop
OUT.L/R – OUTPUT Left/Right
NO ASSIGN – Audio signal is not mute
• Line 2 - h to p indicate the maximum bank number (01 to 72).
• Line 2 - h to p indicate the SEND or NOT SEND.
27
Advertisement
Table of Contents
