Scanning Photo - Sony DCR-TRV40 Operating Instructions Manual

Searching for a photo – PHOTO SEARCH/PHOTO SCAN

Scanning photo

(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the
PHOTO SCAN indicator appears. The indicator changes as follows:
TITLE SEARCH* t DATE SEARCH t PHOTO SEARCH
(no indicator)
* Displayed only when CM SEARCH is set to ON in the menu settings.
(3) Press . or > on the Remote Commander.
Each photo is played back for about five seconds automatically.
3
To stop scanning
Press x.
If a tape has a blank portion between recorded portions
The photo search/photo scan may not work correctly.
The available number of photos that can be searched using the cassette memory
The available number is up to 12 photos. However, you can search 13 photos or more
using the photo scan.
PHOTO SCAN
T
2
SEARCH
MODE
PHOTO 00
SCAN
85