Sony DCR-TRV40 Operating Instructions Manual page 129

Recording still images on "Memory Stick"s
– Memory Photo recording
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make
sure that the LOCK switch is set to the left (unlock) position.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET in
then press the dial (p. 203).
(3) Turn the SEL/PUSH EXEC dial to select BURST, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
(5) Press MENU to make the menu setting disappear.
(6) Press PHOTO deeper.
If the capacity of the "Memory Stick" becomes full
" FULL" appears on the screen, and you cannot record a still image on this "Memory
Stick."
The number of still images in continuous shooting
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the "Memory Stick."
During recording still images continuously
The flash does not work.
When shooting with the self-timer or the Remote Commander
Your camcorder automatically records up to the maximum recordable number of still
images.
PHOTO
3
4
MENU
MEMORY SET
STILL SET
BURST OFF
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
MEMORY SET
STILL SET
BURST OFF
QUALITY NORMAL
IMAGESIZE HIGH SPEED
RETURN EXP BRKTG
MULTI SCRN
[ MENU ] : END
,
MEMORY SET
STILL SET
BURST OFF
QUALITY NORMAL
IMAGESIZE HIGH SPEED
RETURN EXP BRKTG
MULTI SCRN
[ MENU ] : END
MEMORY SET
STILL SET
BURST HIGH SPEED
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
129