Sony DCR-TRV40 Operating Instructions Manual page 122

Using a "Memory Stick" – Introduction
Selecting the still image quality
You can select the image quality in still image recording. The default setting is SUPER
FINE.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR.
(2) Press MENU, then select STILL SET in
(3) Turn the SEL/PUSH EXEC dial to select QUALITY , then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image quality , then press
122
Make sure that the LOCK switch is set to the left (unlock) position.
(p. 203).
the dial.
1
LOCK
MENU
with the SEL/PUSH EXEC dial
VCR
OFF(CHG)
CAMERA
MEMORY/
NETWORK
3
4
MEMORY SET
STILL SET
BURST
QUALITY SUPER FINE
IMAGESIZE FINE
RETURN STANDARD
REMAIN
12
[ MENU ] : END
MEMORY SET
STILL SET
BURST
QUALITY STANDARD
IMAGESIZE
RETURN
REMAIN
36
[ MENU ] : END