Searching for a photo – Photo search/Photo scan
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo
scan indicator appears on the screen.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t (no indicator)
(3) Press . or >.
Each photo is played back for about 5 seconds automatically.
2
SEARCH
MODE
3
To stop scanning
Press x.
Note
The photo search and photo scan work only for tapes recorded in the Digital8
If a tape has a blank portion in the recorded portions
The photo search and photo scan functions may not work correctly.
PHOTO
00
SCAN
system.
59