Checking Recordings - End Search/Editsearch/Rec Review - Sony DCR-TRV40 Operating Instructions Manual

Checking recordings
– END SEARCH/EDITSEARCH/Rec Review
You can use these buttons to check the recorded picture or shoot so that the transition
between the last recorded scene and the next scene you record is smooth.
FN
END SEARCH
You can go to the end of the recorded section after you record.
(1) In the standby, press FN to display PAGE1 (p. 24).
(2) Press END SCH.
The last five seconds of the recorded section are played back and your
camcorder returns to the standby. You can monitor the sound from the speaker
or headphones.
To return to FN
Press EXIT.
To stop searching
Press END SCH again.
EDITSEARCH
You can search for the next recording start point.
Hold down the EDITSEARCH in the standby. The recorded portion is played back.
7 – : To go backward
+
Release EDITSEARCH to stop playback. If you press START/STOP, recording begins
from the point you released EDITSEARCH. You cannot monitor the sound.
38
: To go forward
EDITSEARCH