Playing Back Images In A Continuous Loop - Slide Show - Sony DCR-TRV40 Operating Instructions Manual

Playing back images in a continuous loop
– SLIDE SHOW
You can automatically play back images in sequence. This function is useful especially
when checking recorded images or during a presentation.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make
sure that the LOCK switch is set to the left (unlock) position.
(2) Press FN and select PAGE3.
(3) Press SLIDE SHOW.
(4) Press START. Your camcorder plays back the images recorded on a "Memory
Stick" in sequence.
2
FN
4
SLIDE SHOW
100–0001
PAUSE
To stop the slide show
Press
To pause during a slide show
Press PAUSE.
To return to FN
Press
To start the slide show from a particular image
Select the desired image using –/+ buttons before step 4.
To view recorded images on TV
Before operation connect your camcorder to a TV with the A/V connecting cable
supplied with your camcorder.
If you change the "Memory Stick" during operation
The slide show does not operate. If you change the "Memory Stick," be sure to follow
the steps again from the beginning.
166
1 / 6
1360
– +
END
END.
END to return to PAGE3, then press EXIT.
1
LOCK
VCR
OFF(CHG)
CAMERA
MEMORY/
NETWORK