Sony DCR-TRV40 Operating Instructions Manual page 130

Recording still images on "Memory Stick"s
– Memory Photo recording
When selecting NORMAL or HIGH SPEED
Recording continues up to the maximum number of still images during pressing
PHOTO deeper. Release PHOTO to stop recording.
When selecting HIGH SPEED
Flickering or changes in color may occur. Also, your camcorder prevents focusing on
near objects.
If there is space remaining on the "Memory Stick" for less than three photos
You cannot carry out the exposure bracketing (EXP BRKTG). "
when you press PHOTO.
The effect of exposure bracketing (EXP BRKTG)
The effect may not appear clearly on the LCD screen.
Checking images on a TV monitor or computer display for the expected effect is
recommended.
Recording images with the flash
The flash automatically pops up to strobe. The default setting is auto (no indicator). To
change the flash mode, press
appears on the screen.
Each press of
The flash is automatically adjusted to the appropriate brightness. You can also change
FLASH LVL to the desired brightness in the menu settings (p. 200). Try recording
various images to find the most appropriate setting for FLASH LVL.
130
(flash) changes the indicator as follows:
t No indicator
t t
Auto red-eye reduction: The flash fires before recording to reduce the red-eye
Forced flash:
No flash:
(flash) repeatedly until the flash mode indicator
phenomenon.
The flash fires regardless of the surrounding brightness.
The flash does not fire.
FULL" is displayed
(flash)