Sony DCR-TRV40 Operating Instructions Manual page 194

Connecting your camcorder to your computer using the USB cable
– For Macintosh users
Installing the USB driver
Do not connect the USB cable to your computer before installation of the USB
driver is completed.
For Mac OS 8.5.1/8.6/9.0 users
(1) Turn on your computer and allow the Mac OS to load.
(2) Insert the supplied CD-ROM in the CD-ROM drive of your computer.
The application software screen appears.
(3) Click the "USB Driver" to open the folder containing the six files related to
"Driver."
(4) Select the following two files, and drag and drop them into the System Folder.
• Sony Camcorder USB Driver
• Sony Camcorder USB Shim
(5) When the message appears, click "OK."
The USB driver is installed on your computer.
(6) Remove the CD-ROM from the computer.
(7) Restart your computer.
For Mac OS 9.1/9.2/Mac OS X (v10.0/v10.1)
The USB driver need not be installed. Your Mac is automatically recognized as a drive
just by connecting your Mac using the USB cable.
194