Recording Edited Pictures From A Tape As A Moving Picture - Digital Program Editing (On "Memory Stick"S); Making The Program - Sony DCR-TRV40 Operating Instructions Manual

Recording edited pictures from a tape as
a moving picture – Digital program
editing (on "Memory Stick"s)
You can duplicate selected scenes (programs) for editing onto "Memory Stick"s.

Making the program

(1) Set the POWER switch to VCR.
(2) Insert the tape for playback, and a "Memory Stick" for recording into your
camcorder.
(3) Press MENU and turn the SEL/PUSH EXEC dial to select VIDEO EDIT in
then press the dial (p. 209).
(4) Turn the SEL/PUSH EXEC dial to select MEMORY, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select IMAGESIZE and select the desired
image size, then press the dial.
(6) Search for the beginning of the first scene you want to insert using the video
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
(7) Press MARK on the Remote Commander, or turn the SEL/PUSH EXEC dial to
select MARK, the press the dial.
The IN point of the first program is set, and the top part of the program mark
changes to light blue.
(8) Search for the end of the first scene you want to insert using the video
operation buttons, then pause playback.
(9) Press MARK on the Remote Commander, or the SEL/PUSH EXEC dial.
The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(10) Repeat steps 6 to 9, then set the program.
When one program is set, the program mark changes to light blue.
You can set 20 programs in maximum.
6,8
REW
7
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
IMAGESIZE
TOTAL 0 : 00 : 00
SCENE 0
[ MENU ] : END
PLAY FF
STOP PAUSE
9
0 : 08 : 55 : 06
N X VIDEO EDIT
1 OUT MARK
UNDO
ERASE ALL
START
IMAGESIZE
TOTAL 0 : 00 : 12
2min SCENE 1
320
[ MENU ] : END
MENU
10
0 : 08 : 58 : 06
N X VIDEO EDIT
2 IN MARK
UNDO
ERASE ALL
START
IMAGESIZE
TOTAL 0 : 00 : 31
2min SCENE 3
320
[ MENU ] : END
,
0 : 10 : 01 : 23
N X
4 IN
2min
320
151