Sony DCR-TRV40 Operating Instructions Manual page 202

Changing the default settings with the menu
Icon/item
VCR SET
HiFi SOUND
AUDIO MIX
A/VtDV OUT
LCD/VF SET
LCD B.L.
LCD COLOR
VF B.L.
Notes on LCD B.L. and VF B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
•When you use power supplies other than the battery pack, BRIGHT is automatically
selected.
Even if you adjust LCD B.L., LCD COLOR and/or VF B.L.
The recorded picture will not be affected.
202
Mode Meaning
z STEREO To play back a stereo tape or dual sound track
tape with main and sub sound (p. 221)
1 To play back a stereo tape with the left sound or
a dual sound tape with main sound
2 To play back a stereo tape with the right sound
or a dual sound track tape with sub sound
—— To adjust the balance between the stereo 1 and
stereo 2 (p. 109)
z OFF To output digital images and sound in analog
format using your camcorder
ON To output analog images and sound in digital
format using your camcorder (p. 196)
z BRT NORMAL To set the brightness on the LCD screen to
normal
BRIGHT To brighten the LCD screen
—— To adjust the color on the LCD screen, turn the
SEL/PUSH EXE dial.
To get low-
intensity
z BRT NORMAL To set the brightness on the viewfinder screen to
normal
BRIGHT
To brighten the viewfinder screen
ST1 ST2
To get high-
intensity
POWER
switch
VCR
VCR
VCR
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK
VCR
CAMERA
MEMORY/
NETWORK