Magicfx SPARXTAR SPARK FX User And Installation Manual page 13

Always create a safety zone with a distance of 3 m around the
WARNING
effect of the MAGICFX
of 2 m from the set effect height.
Note that the zone shifts accordingly when the machine is
installed in a tilted position.
Note that overlap of safety zones in a setup with multiple
machines is allowed, as long the air inlets are not obstructed.
Missing or obscured safety symbols on the machine can lead to
WARNING
death or serious injury. Make sure all safety symbols are correctly
in place, see section 2.4.
The output pipe heats up during operation and causes burns
CAUTION
when touched. Do not touch the output pipe of a (recently)
powered machine.
Any material that blocks the output pipe can result in injuries, fire
CAUTION
and damage to the machine when the machine is used. Always
inspect the output pipe before operating and remove any
obstructing material.
Only open the hopper lid when the machine is not powered.
CAUTION
Do not obscure the air inlets on the side of the machine.
CAUTION
Obscured air inlets can result in injuries, fire and damage to the
machine when the machine is used.
Always keep the machine dry and do not let any liquids such as
NOTICE
rain or snow wet the machine.
SPARXTAR. Furthermore, keep a clearance
®
top view
MAGICFX® SPARXTAR — User and Installation Manual 13