Meet The Magicfx ® Sparxtar; Main Parts; Sparxtar Powder - Magicfx SPARXTAR SPARK FX User And Installation Manual

1 MEET THE MAGICFX
The MAGICFX SPARXTAR is a special effects machine for controlled emission of sparks
®
into the air.
The machine transports MAGICFX
internal heater and blows the resulting sparks upwards through the output pipe.
The maximum continuous duration of the effect is 40 seconds. After this period the
effect will stop automatically. With a full hopper a MAGICFX
sparks for a total duration of 9 up to 17 minutes (depending on the set effect height).
The MAGICFX SPARXTAR is outfitted for operation:
®
• with DMX and RDM;
• in sequence with multiple machines.
1.1

MAIN PARTS

OUTPUT PIPE
DISPLAY AND BUTTONS
DMX INPUT & OUTPUT
(5-POLE)
POWER INPUT & OUTPUT
(220-250Vac)
1.2

SPARXTAR POWDER

The MAGICFX SPARXTAR uses MAGICFX
®
powder hopper of the machine with powder (maximum of two bags).
NOTICE
SPARXTAR Powder from the hopper through an
®
The powder is packed in vacuum bags. Do not open the bags
until right before use. This will prevent degradation and
malfunctioning of the powder.
MAGICFX® SPARXTAR — User and Installation Manual
SPARXTAR!
®
SPARXTAR Powder to create the effect. Fill the
®
SPARXTAR can deliver
®
POWDER HOPPER
FX LED INDICATOR
SAFETY EYE
Main parts
5