3.0
ERROR CODES
ERROR CODE
Err 4
Err 5
Err 6
FAIL H
FAIL L
or
@Adam Equipment Company 2007
DESCRIPTION
Initial Zero is greater than the
permissible value (typically 4%
of maximum capacity) when
power is turned on or when the
[Zero] key is pressed,
Keyboard error.
A/D count is not correct when
turning the scale on.
Calibration error
POSSIBLE CAUSES
Weight on the pan when
turning the scale on.
Excessive weight on the pan
when zeroing the scale.
Improper calibration of the
scale.
Damaged load cell.
Damaged Electronics.
Improper operation of the
scale.
Platform is not installed.
Load cell may be damaged.
Electronics may be
damaged.
Improper calibration.
If
the
contact your dealer or Adam
Equipment for assistance.
5
problem
persists