5.0 ERROR CODES
ERROR
DESCRIPTION
CODES
Over range
$ "
Zero Setting Error
& ' '
A/D out of range
& ' '
Battery low
$
@Adam Equipment Company 2004
SUGGESTIONS
Remove the weight from the scale.
If the problem persists contact your dealer or Adam
Equipment for assistance.
The scale was outside the normal auto-zero setting
range (4% of capacity),
Check the hook is empty or
Calibrate zero point again.
The values from the A/D converter are outside the
normal range.
Remove weight from the scale if overloaded.
The load cell or the electronics may be faulty.
If the problem persists, contact your dealer or Adam
Equipment for assistance.
Charge the battery immediately.
8