Wireless Card; Removing The Wireless Card - Dell Vostro 3515 2V448 Service Manual

Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the M.2 2280 solid-state drive into the M.2 card slot on the system board.
3. Place the M.2 thermal plate on the M.2 2280 solid-state drive.
NOTE: When installing the M.2 solid-state drive to the system, tuck the tabs on the thermal plate under the hooks on
the palmrest and keyboard assembly.
4. Align the screw holes on the M.2 thermal plate with the screw holes on the palmrest and keyboard assembly.
5. Replace the (M2x2) screw that secures the M.2 thermal plate to the palmrest and keyboard assembly.
Next steps
1. Install the base cover.
2. Install the SD card.
3. Follow the procedure in

Wireless card

Removing the wireless card

Prerequisites
1. Follow the procedure in
2. Remove the SD card.
3. Remove the base cover.
About this task
The following images indicate the location of the wireless card and provides a visual representation of the removal procedure.
30 Removing and installing components
After working inside your
Before working inside your
computer.
computer.