Description, device design, dimension drawing
2.2 Connections and terminal designation
2.2
Connections and terminal designation
The line input terminals
The output terminals
Installation (Page 25)).
Connections and terminal designations
①
②
②
⑤
*1)
Figure 2-2
*1)
Figure 2-3
10
①
②
are used to connect to the loads to be supplied (see also Section
Line input L1, L2, L3, PE
output "+"
output "–"
signaling contacts 13, 14
Do not subject the end stop to higher loads
Terminal data 6EP3436-8SB00-0AY0
Do not subject the end stop to higher loads
6EP1437-3BA10 terminal data
can be used to establish the connection to the supply voltage.
One screw terminal each
2 screw terminals
2 screw terminals
One screw terminal each
SITOP PSU8200 3ph
Manual, 11.2014, C98130-A7638-A1-2-7629