Description, device design, dimension drawing
2.2 Connections and terminal designation
2.2
Connections and terminal designation
The line input terminals
The output terminals
Installation (Page 33)).
Connections and terminal designations for 6EP1333-3BA10 and 6EP1334-3BA10
①
②
②
⑩
Do not subject the end stop to higher loads
*1)
Figure 2-2
10
①
②
are used to connect to the loads to be supplied (see also Section
Line input L1, N (L2), PE
Output +
Output –
Signaling contact 13, 14
Terminal data for 6EP1333-3BA10 and 6EP1334-3BA10
can be used to establish the connection to the supply voltage.
One screw terminal each
2 screw terminals
2 screw terminals
One screw terminal each
SITOP modular 1ph/2ph
Manual, 04.2018, C98130-A7548-A1-4-7629