Connections And Terminal Designation - Siemens SITOP PSU2600 3ph Manual

Description, device design, dimension drawing

2.2 Connections and terminal designation

2.2 Connections and terminal designation
The line input terminals
The output terminals
Installation (Page 23)).
Connections and terminal designations
①
②
②
④
⑥
*1)
Figure 2-2
10
①
②
are used to connect to the loads to be supplied (see also Section
Line input L1, L2, L3, PE
output "+"
output "–"
Signaling contact
Reset
Do not subject the end stop to higher loads
Terminal data
can be used to establish the connection to the supply voltage.
One screw terminal each
2 screw terminals
2 screw terminals
One screw terminal each
One screw terminal each
SITOP PSU2600 3ph
Manual, 01.2018, A5E39263454-2-76