Target Function - A&D UC-321 Instruction Manual

The Target Function
The difference between the preset target weight and the current weight can
be displayed.
Presetting a New Target Weight
1
Set the slide switch to "TARGET".
2
Press and hold the measurement switch
gently in the condition of displaying
nothing.
The last preset target weight is displayed.
3
Press the measurement switch gently to
display a new target weight.
Press and hold the measurement switch to in-
crease the display, until the desired value is in-
dicated to specify a new target weight.
4
Release the measurement switch to
store the new target weight, when
displaying it.
The scale is automatically turned off after dis-
playing a new target weight for approximately
five seconds.
Slide switch
- 8 -
Measurement switch