The Memory Function
Up to 31 weight data can be stored in memory. The 32nd data is stored by
deleting the oldest stored data. The difference from the previous result is
displayed automatically.
Storing a Current Weight.
1
Set the slide switch to "MEMORY".
2
Press the measurement switch gently.
The last weight is displayed.
3
Step on your scale.
Step on your scale gently, after displaying
0.00 kg and the
disappears, the measurement is started. Re-
main still during measurement.
If the condition to display 0.00 kg is main-
tained for approximately ten seconds, the
scale is automatically turned off.
4
The weight can be read after the
mark is displayed.
5
Step off the scale.
6
The weight is stored in memory
and the difference from the last
weight is displayed.
The weight data is stored in memory
and the difference from the previous
result is displayed for approximately
five seconds. And, the scale is auto-
matically turned off.
mark. When the
mark
- 6 -