A&D UC-321 Instruction Manual page 9

Comparing a Current Weight with a Preset Target Weight
1
Set the slide switch to "TARGET".
2
Press the measurement switch gently.
The stored target weight is displayed.
3
Step on the scale.
Step on your scale gently after displaying
0.00 kg and the
disappears, the measurement is started.
Remain still during measurement.
If the condition to display 0.00 kg is main-
tained for approximately ten seconds, the
scale is automatically turned off.
4
The difference between the pre-
set target weight and the current
weight is displayed.
The scale is automatically turned off
after the difference has been displayed
for approximately five seconds.
5
Step off the scale.
mark. When the mark
- 9 -