A&D UC-321 Instruction Manual page 5

Measuring a Baby or an Animal
1
Set the slide switch to "WEIGHT".
2
Press the measurement switch gently
and step on your scale.
All display segments are indicated for several sec-
onds. Step on the scale without any baby or ani-
mal in your hands before displaying 0.00 kg.
3
Pick up the baby or animal and step
on the scale again.
Step on your scale with the baby and animal
within ten seconds after displaying 0.00 kg and
the mark. Remain still during measurement
until displaying
4
The weight of the baby or animal can
be read after displaying the
The scale is turned off automatically after
approximately five seconds.
5
Step off the scale.
mark.
mark.
- 5 -