Date Stamp - NANO CAM NCP-DVRFHD User Manual

DATE STAMP

Date stamp is used to stamp your photos with the time and date that they are taken� To select your preferred time and date format follow
the instructions below�
1� Enter the Photo screen�
2� Press the  Button to enter the Photo Menu�
3� Use the  Up and  Down Buttons to navigate the Photo Menu and highlight the Date Stamp setting and press OK (Rec/Ok) to select�
4� Use the  Up and  Down Buttons to highlight either Date, Date/Time or ON, then press the OK (Rec/Ok) button to confirm your
selection�
Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�
• This setting can only be accessed through the Photo Menu, please make sure that you are in the Photo screen when you access the
menu�
• The Date Stamp setting is not used to set the cameras internal clock� To set the time follow the instructions Date/Time in the settings
section�
33