Connecting To Power - NANO CAM NCP-DVRFHD User Manual

CONNECTING TO POWER

Only use the included charger to power and charge the Car DVR�
1� Once the Car DVR is securely installed on your vehicle's windscreen, plug the 12v charger into your vehicle's cigarette lighter�
2� Run the cable along your vehicle's console and windscreen and plug the USB Micro plug into the Car DVR�
Note:
• It is recommended that the Car DVR is installed behind your vehicle's rear view mirror�
• Make sure that the camera view is not obstructed by any window tint or any other objects�
• When removing the suction mount be sure to release the suction mount by switching the suction latch to the down position�
• It is strongly recommend that the camera is installed so that it does not encroach further than the top 10% of your windscreen to avoid
any potential road restrictions�
11