To Remove The Memory Card; 2�1 Installing The Car Dvr; Adjust The Device Position - NANO CAM NCP-DVRFHD User Manual

Note:
• Do not remove or insert the memory card while the Car DVR is turned on as this may damage the memory card or corrupt the memory
cards stored data�
• Please use a Class 6 or higher rated micro SD card with a maximum capacity of 32GB�
• Please format the Micro SD card before the initial use�
• When removing the memory card, be careful as the card may eject quickly�

TO REMOVE THE MEMORY CARD

Ensure that the Car DVR is powered off, then push the memory card until a click is heard and then release the card to eject�
2.1 INSTALLING THE CAR DVR
1� Remove the protective stickers from the Car DVR and the Suction Mount�
2� Insert the plastic mount end of the Suction Mount into the cameras mount slot slide the mount back until the camera is firmly attached�
3� Press the mount base firmly against the windscreen with the suction mount switch in the down position�
4� Secure the mount by flipping the switch up while still holding the base against the windscreen�

ADJUST THE DEVICE POSITION

1� Loosen the knob on the mounting bracket, and adjust the vertical and horizontal angle of the camera�
2� Tighten the knob to lock the position of the camera�
10