2�5 Using The Car Dvr; Recording Video; Locked Recording - NANO CAM NCP-DVRFHD User Manual

2.5 USING THE CAR DVR

RECORDING VIDEO

When the Car DVR is connected to your vehicle's 12v power supply, the Car DVR will automatically power up and begin recording when
you start your vehicle� During the start up the buttons will be unresponsive and the camera will take a moment to begin recording� The
Car DVR will automatically stop recording and shutdown when your vehicle is powered off�
Note:
• Because of how some vehicles are wired, the recording may continue when the engine is switched off� If this happens, please manually
turn off the Car DVR or remove the car adapter from the cigarette lighter when not in use�
• The recording loop length can be configured to save a video file for every 1,2,3,5 or 10 minutes of recording� For information on how to
adjust this setting please refer to the Loop Recording section of this manual�
• The device saves the recorded footage and photos on to the inserted Micro SD Card� If the memory card capacity is full, the oldest file
in the memory card will be overwritten�

LOCKED RECORDING

Locked Recording saves the current video file and protects it from being overwritten� To manually start a Locked Recording follow the
instructions below�
1� During recording push the  Menu button�
15