Date Stamp - NANO CAM NCP-DVRFHD User Manual

Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�

DATE STAMP

Date stamp will stamp the current date onto the footage for future reference� To set the date stamp please follow the instructions below�
1� Press the OK (Rec/Ok) Button to stop the Car DVR from recording�
2� Press the  Button to enter the Video Menu�
3� Use the  Up and  Down Buttons to navigate the Settings Menu and highlight the Date Stamp setting and press OK (Rec/Ok) to
select�
4� Use the  Up and  Down Buttons to highlight either OFF or ON, then press the OK (Rec/Ok) button to confirm your selection�
Note:
• Menus cannot be accessed while the camera is recording� Please stop the recording before attempting to access the menu�
• For date stamp to be correct the time and date must be set first� To set the time and date please see section Date/Time
21