Miele H 7464 BP Operating And Installation Instructions page 96

Cleaning and care
Preparing the descaling process
You will need a container of approx.
1 litre capacity.
A plastic tube (with suction cup) is
supplied with your oven so that you
do not have to hold the container with
the descaling agent underneath the
water intake pipe.
We recommend using the descaling
tablets supplied. They have been
specially developed for Miele for
optimum results.
Tip: Miele descaling tablets are
available to order from the Miele
webshop, from the Miele Customer
Service Department or from your Miele
dealer.
Other descaling agents, which contain
other acids besides citric acid and/or
other undesirable substances, such as
chlorides for example, could cause
damage.
Moreover, the descaling result
required could not be guaranteed if
the descaling solution was not of the
appropriate concentration.
 Fill the container with approx. 600 ml
of cold tap water and thoroughly
dissolve one descaling tablet in it.
96
Carrying out the descaling process
 Select
Further .
 Select
Descale .
If the functions and automatic
programmes that use added moisture
are already locked, the descaling
process can be started immediately by
touching OK.
 Push the universal tray into the top
shelf level as far as it will go to collect
the descaling solution after it has
been used. Confirm the message
shown with OK.
 Place the container with the
descaling solution on the floor of the
oven compartment.
 Attach one end of the plastic tube to
the water intake pipe. Place the other
end of the plastic tube in the bottom
of the descaling solution container
and secure the plastic tube to the
container with the suction cup.
 Confirm with OK.
The water intake process will begin. You
will hear the noise of the pump.