Miele H 7464 BP Operating And Installation Instructions page 108

Problem solving guide
Problem
The sensor controls do
not respond.
Press OK for 6 seconds to
unlock appears in the
display when the oven
is switched on.
Power cut -process
cancelled appears in the
display.
appears in the
12:00
display.
Maximum operating hoiurs
reached appears in the
display.
108
Cause and remedy
You have selected the
When the oven is switched off, the sensor controls do
not respond.
 As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor
controls to respond even when the oven is
switched off, select the
setting.
The oven is not connected to the power supply.
 Check that the oven plug is correctly inserted into
the socket and switched on.
 Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
 Touch and hold the  On/Off button until the
display switches off and the oven restarts.
The  system lock has been activated.
 You can deactivate the system lock for a
programme by touching the OK sensor control for
at least 6 seconds.
 If you want to permanently deactivate the system
lock, select the
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
The power supply was interrupted for longer than
150 hours.
 Reset the time and date.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
Display | QuickTouch
|
Display QuickTouch
|
Safety System lock 
| Off setting.
|
On
| setting.
Off