Operation; Changing Values And Settings For A Cooking Programme - Miele H 7464 BP Operating And Installation Instructions

Operation

 Switch the oven on.
The main menu will appear.
 Place the food in the oven
compartment.
 Select the desired function.
The function and the recommended
temperature will appear.
 Change the recommended
temperature if necessary.
The recommended temperature will be
accepted within a few seconds. You
can change the temperature
subsequently via the arrow buttons.
 Confirm with OK.
The required and actual temperatures
will appear and the heating-up phase
will commence.
You will see the temperature increasing.
A buzzer will sound when the set
temperature is reached for the first time.
 After cooking, select the sensor
control for the selected function to
end the cooking programme.
 Take the food out of the oven.
 Switch the oven off.
52
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the  sensor control to
change the values or settings for this
programme.
 Select the  sensor control.
Depending on the function, the
following settings appear:
– Temperature
–
Core temperature
– Duration
– Finish at
–
Start at
– Booster
– Pre-heat
–
Rapid cooling phase
– Keeping warm
– Crisp function
Changing values and settings
 Select the desired value or setting
and confirm with OK.
 Change the value or setting and
confirm with OK.
The cooking programme will restart with
the new values and settings.