Mazda CX-5 Manual page 681

▼ Cavity Protection
Cavities are treated for protection at the
factory, but additional protective treatment
after the vehicle has been put into use will
extend the life of the body.
We recommend that you consult an expert
repairer, we recommend an Authorised
Mazda Repairer concerning this additional
precaution.
▼ Bright-Metal Maintenance
Use tar remover to remove road tar and

insects. Never do this with a knife or
similar tool.
To prevent corrosion on bright-metal

surfaces, apply wax or chrome
preservative and rub it to a high lustre.
During cold weather or in coastal areas,

cover bright-metal parts with a coating
of wax or preservative heavier than
usual. It would also help to coat them
with noncorrosive petroleum jelly or
some other protective compound.
CAUTION
Do not use steel wool, abrasive cleaners, or
strong detergents containing highly
alkaline or caustic agents on
chrome-plated or anodised aluminium
parts. This may result in damage to the
protective coating and cause
discolouration or paint deterioration.
Appearance Care
▼ Undercoating
This special coating is applied to the
critical parts of the underside to protect
vehicles from damage caused by
chemicals or stones. This coating is liable
to be damaged with time. Check this
coating periodically.
Should repairs be necessary, consult an
expert repairer, we recommend an
Authorised Mazda Repairer. They are well
informed on how repairs should be made.
▼ Aluminium Wheel Maintenance
A protective coating is provided over the
aluminium wheels. Special care is needed
to protect this coating.
CAUTION
Do not use any detergent other than mild
detergent. Before using any detergent,
verify the ingredients. Otherwise, the
product could discolour or stain the
aluminium wheels.
NOTE
Do not use a wire brush or any abrasive

cleaner, polishing compound, or solvent
on aluminium wheels. They may damage
the coating.
Always use a sponge or soft cloth to

clean the wheels.
Rinse the wheels thoroughly with
lukewarm or cold water. Also, be sure to
clean the wheels after driving on dusty
or salted roads to help prevent
corrosion.
Avoid washing your vehicle in an

automatic car wash that uses high-speed
or hard brushes.
Maintenance and Care
*
6-69
*Some models.