Mazda CX-5 Manual page 444

When Driving
Rear View Monitor
When reversing near a three-dimensional object
When reversing near an overhanging object, the vehicle may hit the object even if the
anticipated course line does not contact the object on the screen. The position of the object
displayed on the screen is different from the actual position because the anticipated course
lines on the screen are displayed based on a horizontal road surface. When backing up near
an overhanging object, confirm the rear and surrounding conditions directly with your eyes.
(Screen display)
▼ Picture Quality Adjustment
WARNING
Always adjust the picture quality of the rear view monitor while the vehicle is stopped:
Do not adjust the picture quality of the rear view monitor while driving the vehicle. Adjusting
the picture quality of the rear view monitor such as brightness, contrast, colour, and tint while
driving the vehicle is dangerous as it could distract your attention from the vehicle operation
which could lead to an accident.
Picture quality adjustment must be done while the shift lever (manual transaxle) or the
selector lever (automatic transaxle) is in reverse (R) position.
There are 4 settings which can be adjusted including, brightness, contrast, tint, and colour.
When adjusting, pay sufficient attention to the vehicle surroundings.
1. Select the icon on the screen to display the tabs.
2. Select the desired tab item.
3. Adjust the brightness, contrast, tint, and colour using the slider.
If you need to reset, press the reset button.
4. Select the icon on the screen to close the tab.
4-286
(Actual view)